Buy Deutsch DTM, DT and DTP Connectors in Australia
- Choosing a selection results in a full page refresh.
If you are looking to buy Deutsch connectors in Australia, 12Volt Motorsports stocks Deutsch DTM, DT and DTP connector kits for motorsport wiring, automotive wiring, off-road wiring, race cars, drag cars and custom harness builds. We are based in Altona Meadows in Melbourne's western suburbs and ship Australia-wide.
Deutsch connectors are commonly used in professional motorsport wiring harnesses because they are sealed, durable, serviceable and available in multiple sizes to suit sensor wiring, ECU wiring, lighting circuits, power circuits and harsh vehicle environments.
Deutsch connectors are sealed electrical connectors commonly used in motorsport, automotive, off-road, marine, industrial and harsh-environment wiring applications. They are designed to protect electrical connections from moisture, dust, vibration and dirt while still allowing the harness to be unplugged and serviced.
In motorsport wiring, Deutsch connectors are commonly used for sensors, actuators, lighting, switches, fuel pumps, fans, engine bay wiring, removable harness sections and custom wiring looms.
The three most common Deutsch connector families used in motorsport wiring are DTM, DT and DTP. The correct connector depends on the current draw, wire size, pin size and application.
| Deutsch Series | Typical Current Rating | Common Use |
|---|---|---|
| Deutsch DTM | Up to 7.5A per pin | Sensor wiring, ECU signals, switches and low-current circuits |
| Deutsch DT | Up to 13A per pin | General automotive wiring, lighting, solenoids, relays and medium-current circuits |
| Deutsch DTP | Up to 25A per pin | Fuel pumps, fans, power feeds and higher-current circuits |
Use Deutsch DTM connectors for low-current signal wiring such as sensors, ECU inputs, switch inputs and small control circuits. DTM connectors use smaller contacts and are a good choice when space is tight.
Use Deutsch DT connectors for general-purpose automotive wiring. DT connectors are one of the most common sealed connector families used in motorsport and performance wiring. They suit many medium-current circuits where DTM is too small and DTP is not required.
Use Deutsch DTP connectors for higher-current circuits such as fuel pumps, thermofans, larger power feeds and heavier-duty wiring where the circuit current and wire size require a larger connector.
Always choose the connector series based on current draw, wire size, terminal size, environment and serviceability. Do not choose a connector only because it physically fits.
Deutsch connectors are commonly used with Tefzel wire, Raychem DR25 heatshrink, Sumitomo W5DL adhesive heatshrink, Raychem ATUM adhesive heatshrink, engine sensors and ECU plugs and pins when building professional motorsport wiring harnesses.
For a professional harness, Deutsch connectors are normally crimped with the correct open-barrel or solid-contact crimp tooling depending on the terminal type. The connector exit can then be supported and sealed with suitable heatshrink, moulded boots or adhesive-lined heatshrink depending on the harness design.
Call us on 0458 102 134 or email 12voltmotorsports@gmail.com. We can help you choose the correct Deutsch connector series, pin count, terminal type and related wiring materials for your harness build.
12Volt Motorsports stocks Deutsch DTM, DT and DTP connector kits in Australia. We are based in Melbourne and ship Deutsch connectors Australia-wide.
Deutsch DTM connectors are used for low-current signal wiring, Deutsch DT connectors are used for general-purpose automotive wiring, and Deutsch DTP connectors are used for higher-current circuits. The correct choice depends on current draw, wire size and application.
Deutsch DTM, DT and DTP connectors are sealed connectors designed for harsh environments. When assembled correctly with the correct seals, wedges and terminals, they provide strong protection against moisture, dirt and vibration.
Deutsch DTM connectors are commonly used for sensor wiring, ECU signal wiring and low-current circuits because they are compact and suited to smaller wire sizes.
Deutsch DTP connectors are commonly used for higher-current circuits such as fuel pumps, fans and larger power feeds. The final connector choice should be based on current draw, wire size and circuit design.
Yes. Deutsch connectors should be assembled using the correct crimp tooling for the terminal type. Correct crimping is important for reliability, current capacity and long-term serviceability.
Yes. 12Volt Motorsports stocks Deutsch connector kits including housings, wedges and terminals across DTM, DT and DTP series connectors.
Yes. We ship Deutsch connectors to Sydney, Brisbane, Adelaide, Perth, Canberra, Hobart, Darwin and everywhere in between.
Thanks for subscribing!
This email has been registered!